Sintere mesh filter tubes
Sintered mesh filter tubes are simple but widely used in particle filter and water filter.



Sintered mesh filter tubes are among the simplest form of sintered mesh filter elements. The sintered wire mesh bulk sheet is rolled and welded and form a double end opening tube. The fine mesh side can be on inside or outside diameter, the corresponding flow direction then is from inside to outside or from outside to inside.
There will be whether sealing rings or gasket putting on each end of the sintered mesh filter tube. Then the sealed filter tube is a complete filter element. The sintered mesh filter tubes are often used in gas filter, air filter, strainer filter, airbag device, spray gun, etc.
Perforated metal sintered mesh is popular in sintered mesh filter tubes which are large in size and handling with high pressure or solid loads. For extreme working condition, there will be perforated metal on both sides of the sintered mesh filter tubes. These sintered mesh filter tubes may be used in automatic self-cleaning water filters, BWTS water filtration system, etc.
- Micron rating: 1 2 5 10 15 20 30 40 50 80 100 150 200 micron standard, other micron and filter cloth can be chosen as request.
- Diameter: We have made : 10mm minimum, & 1500 mm maximum. But there is no limit on the diameter as the sintered mesh filter media can be connected by welding.
- Length: 5 mm to above 2500 mm, depends on the application.
- 304 304L stainless steel
- 316 316L stainless steel
- 904L stainless steel
- 310S stainless steel
- Duplex 2205 2507 super stainless steel
- Monel 400
- Inconel 601
- Hastelloy C276 C22
Hebei Lianda Filter Equipment Co., Ltd.
Address: No.30, Weiyi Road, Economic Development Zone, Anping County, Hebei Province, China
Phone: +86 318 7529090
Fax: +86 318 7529191
Email: info@liandafilter.com